hicould help me about Event Id 129 in Ms Exchange server2007 Cluster Environiment.plssss help

Most likely related to some sort of storage controller. You don't provide enough information.Take a look here:http://www.eventid.net/display.asp?eventid=129&source=jas

It is related with Storage. You need to run the Diagnostic tool provided by vendor to make sure there are no issues with storage or storage controllersVinod |CCNA|MCSE 2003 +Messaging|MCTS|ITIL V3|

Hi,this is venkat i have one issuse getting error ( Event Id 129 ) when the Exchange cluster server is moving from one node server to another node server in Exchange server 2007 Envenroniment.please help me and let me know types of clusters in Exchange server 2007. Reset to device, \Device\RaidPort0, was issued. (Event Id 129 )

That is just informational. You really dont have to worry about that. But if still need then you can run the diagonostic tool on storage controllers for types of cluster in EX2007 see below High Availability http://technet.microsoft.com/en-us/library/bb124721.aspx Vinod |CCNA|MCSE 2003 +Messaging|MCTS|ITIL V3|

You still do not provide enough information. Those event ids have a source.If you go to the eventid.net site I posted and enter the source, you might get some useful information.There are several entries related to Reset to device \Device\RaidPort1 was issuedjasJon-Alfred Smith MCTS: Messaging MCSE: S+M

Hi Venkat, Could you please paste the complete event error here? Event ID 129 is a port driver event detecting an I/O timeout or a delay in the response with its target devices. So please make sure your storage/storage controllers work well as Vinod mentioned before. Thanks, Elvis

Hi Elvis ,could you please help me regarding this issuse( Event Id is 1003 ) desicrption : Error code 000000000000001e, parameter1 ffffffffc0000005, parameter2 fffffadffee79009, parameter3 0000000000000001, parameter4 0000000020c97311. which is in cluster server 1when the cluster server is runing on node 2 in exchange server 2007 .please help me now.

Hi,please help me how to view cluster services , network servicesand exchange services runing on exchange 2007 cluster server.thanks ,venkat

Hicould you please let me about types of clusters inExchange sever 2007 like (CCR,LCR,SCR) who are available inExchange server 2007.IRequire full information about it please help me.

for types of cluster in EX2007 see below High Availability http://technet.microsoft.com/en-us/library/bb124721.aspx Vinod |CCNA|MCSE 2003 +Messaging|MCTS|ITIL V3|

Hi Venkat, Could you please paste the complete event in event viewer? At least, it should contain an event source. As I mentioned before, Event ID 129 is a port driver event detecting an I/O timeout or a delay in the response with its target devices. Have you checkedyour storage/storage controllers? If you have a diagnostic tool provided by vendor, please run it and see if there is any problem.Thanks,Elvis

Hi Elvis ,This is venkat i had one more problem with (Event id 11) when the cluster server is down after moved from other node and thisserver is unable move to other server getting this error (The driver detected a controller error on \Device\RaidPort0. ) in the Exchange 2007 cluster server.please help .weather it is problem with SAN storage or Excahnge server 2007plssss help Thanks ,Venkat.

Hi,And one more thing what about Dagnostic tool please let me know .Thanks Venkat

HI,This Event ID 129 mostly pop up with Storage controller related issues. Microsoft has been released MS KB article 915858for this and per my knowledge this Event notification doesnt affect any functionally of Storage system of the server. Further please fallow steps in KB article and install requested hot fix. Normally Storage Diagnostic tools come with the respective storage vendor, so I think you should ask about tool from your vendor ResourcesYou receive Warning event IDs 56, 118, or 129 after you install Windows Server 2003 SP1 on a computer that is using the Microsoft Storport storage driver Regards Chinthaka Shameera | MCITP: EA | MCSE: M | http://howtoexchange.wordpress.com/

HiShemeera,This is Venkat Many thanks for you reply and one more issuse with same (Event Id 11 ,Description is : The driver detected a controller error on \Device\RaidPort0. ) and Event id 304 ,description is : An unrecoverable path failure occurred on SCSI address Port 0 B0 T0 L1. Disk 600508B400054B450001400000140000 is still accessible over redundant path(s)., An unrecoverable path failure occurred on SCSI address Port 0 B0 T0 L13. Disk 600508B400054B330001400000260000 is still accessible over redundant path(s).) (Evenet id :32 Description ; HP MPIO DSM for EVA Disk Arrays failed to return a Path to \Device\MPIODisk14. )Event Id : 22 ,Description : A fail-over on \Device\MPIODisk0 was attempted, however the attempt failed. The devices will be removed. )Event Id 16 :description A fail-over on \Device\MPIODisk14 occurred. )Event Id 1135 Cluster node HYD-MBX-02 was removed from the active server cluster membership. Cluster service may have been stopped on the node, the node may have failed, or the node may have lost communication with the other active server cluster nodes. please check out theseEvents and help me .ThanksVenkat

HI, those issues very related with your Hardware vender, but Ill give you some explanation on above issues.This Event 1135generates cluster node send six consecutive heartbeats through all network interfaces that are dedicated for internal cluster communication. In this case if active node doesnt get any positive reply from other node, itll think other node services stopped or removed from the active node.Regards Chinthaka Shameera | MCITP: EA | MCSE: M | http://howtoexchange.wordpress.com/

Hi Shameera,This is venkat many thanks for your reply .Could you let me about cluster types in Exchange server 2007 like (CCR.SCR.LCR.ext......) and how to updated GAL for ALL USERS in Exchange server 2007 and Are there anyScrip (or) camd .Please let me know .ThanksVenkat.

HI, can you start new thread for this matter? Its very helpful for Members to find related issues.Regards Chinthaka Shameera | MCITP: EA | MCSE: M | http://howtoexchange.wordpress.com/

Hi,I Do not understand your question?plss le t me know .

Hi I mint you have asked a new question in same thread but the new one doesn’t related to your previous issue. So if you post new question as a new thread, there is a chance to get more answers.Regards Chinthaka Shameera | MCITP: EA | MCSE: M | http://howtoexchange.wordpress.com/